Flow VIN Tune

Alfa Romeo Spider 1.8 TBi

Ce guide est pour l’instant disponible en anglais.

Famille d’ECU
MED17.3.3

Son ECU

Bosch MED17.3.3 — the TriCore-generation petrol controller of the later 1.8 TBi applications. Engine-bay mounted, connected through large multi-pin connectors.

Comment il se lit

Mainstream flashing tools handle this family through the OBD port for reading and writing on these applications, with bench access as the fallback for locked or recovery cases. Your tool’s vehicle list for your exact car is the authority on the supported mode.

Ce que couvrent Stage 1 et Stage 1+

Stage 1 on this car is a documented recalibration of the factory maps for a mechanically standard example — built from your own original file and approved by a human tuner before you can download it.

Stage 1+ is the declared-setup version: your fuel and supporting hardware are written into a per-ECU contract together with the expected gains for that combination. The stage guide walks through choosing between them.

Commencez par ces guides

Chaque fichier de Flow VIN Tune est vérifié et approuvé par un préparateur humain avant de pouvoir être téléchargé. Modifier le logiciel moteur peut affecter la réception par type, l’assurance et la garantie constructeur, et son usage sur route peut être restreint dans votre pays — la conformité relève de votre responsabilité. Les guides sont des informations générales, pas des instructions pour votre véhicule précis ; en cas de doute, consultez un professionnel.