Why files get rejected — and how to fix yours
Это руководство пока доступно на английском языке.
A rejection is not a dead end. It means a human tuner looked at your file and found something that stops them from building a calibration on top of it — and wrote down why.
This guide walks through the common rejection causes and the practical fix for each, so your next submission goes through.
Перед началом
- Your order page open — the rejection note states the specific reason.
- The file you uploaded, or access to the car for a fresh read.
01Read the rejection note on your order
Open the order and read the note first. Every rejection states a reason — a partial read, the wrong file, an unsupported ECU — and usually what the tuner expects instead.
If anything in the note is unclear, ask in the support chat on the same page; that conversation stays attached to your order, so the team sees the full context.
02Match the reason to a cause below
The troubleshooting section at the end of this page covers nearly every rejection we see, with the fix for each. Find the one that matches your note before touching the car or the file.
03Fix the underlying problem
Most fixes end with a fresh read of your ECU. If you need to read again, follow the reading guide step by step — interrupted and partial reads are the most common cause of a second rejection.
Do not edit, re-save, or "repair" a problem file by hand. Tuners work only from a file exactly as your tool produced it.
04Restart the order with the corrected file
Use the restart action on the order page to upload the corrected read — you are not charged again. Your vehicle details, history, and conversation stay in place, and the tuner sees the new file version next to the old one.
Устранение неполадок
- Partial or interrupted read
- The file is smaller than your ECU’s full memory or stops mid-region, so the tuner cannot verify or modify it. Re-read with stable power (battery maintainer connected) using your tool’s full-read option, and upload the complete file.
- Wrong file for your car
- The upload does not match the vehicle on the order — another car’s dump, a file for a different ECU, or an export from unrelated software. Re-read your own car and upload exactly what the tool saved.
- "Virtual read" instead of a real one
- Some tools offer a stock file downloaded from their own database instead of reading your car. We need the real contents of your ECU — re-read with a method that physically reads the ECU, so the file reflects your car’s actual state.
- Unsupported or not-yet-enabled ECU
- Your ECU family is not on the supported list, or is temporarily disabled while we validate it. Check the supported vehicles in the intake flow; if your ECU is not there yet, contact support to hear when it opens rather than re-uploading the same file.
- File is already tuned
- The upload differs from a factory calibration — it already carries someone’s modifications, and our tuners do not layer changes over an unknown tune. If you kept the original backup from before the previous tune, upload that; if not, contact support, since the options depend on your exact ECU.
- Corrupted or unreadable upload
- The file fails basic structure checks — truncated, zipped, renamed from another format, or an export instead of the raw binary. Upload the raw .bin exactly as the tool saved it: no archives, no extension changes, no hex edits.
- Vehicle details do not match the file
- The ECU in the file identifies as different hardware or software than your intake answers suggest. Re-check model, year, engine, and ECU family on the order — or make sure you read the car the order is actually for.
Каждый файл Flow VIN Tune проверяется и одобряется человеком-тюнером до того, как его можно будет скачать. Изменение программного обеспечения двигателя может повлиять на одобрение типа, страховку и заводскую гарантию, а использование на дорогах общего пользования может быть ограничено в вашей стране — ответственность за соблюдение требований лежит на вас. Руководства — это общая информация, а не инструкции для вашего конкретного автомобиля; в случае сомнений обратитесь к специалисту.
Похожие руководства
Reading your ECU: tools and methods (OBD vs bench)
Getting a complete, correct .bin out of your car before you upload it.
Preparing your file and uploading it to Flow VIN Tune
File formats, full vs partial reads, and walking the upload flow without surprises.
Identifying your ECU (Bosch MED17.3.x and friends)
Match your car to its ECU family using labels, part numbers, and the intake form.